User's Manual

TD-W9970
300Mbps Wireless N USB VDSL2 Modem Router User Guide
9. In the Protocol field, here are four options, All, TCP, UDP, and ICMP. Select one of them
from the drop-down list for the target.
10. Click the Save button.
Figure 4-79
4.15.2 LAN Host
Choose menu “Firewall”
→
“LAN Host”, and then you can view and set a Host list in the screen
as shown in Figure 4-80.
Figure 4-80
 Description: Here displays the description of the host and this description is unique.
 Address Info: Here displays the information about the host. It can be IP or MAC.
 Edit: To modify an existing entry.
To add a new entry, please follow the steps below.
1. Click the Add New button.
2. In the Mode field, select IP Address or MAC Address.
 If you select IP Address, please follow the steps below:
1) In Description field, create a unique description for the host (e.g. Host_1).
2) In IP Address field, enter the IP address.
 If you select MAC Address, please follow the steps below:
1) In Description field, create a unique description for the host (e.g. Host_1).
2) In MAC Address field, enter the MAC address.
86