User's Manual

TD-W9980B
N600 Wireless Dual Band Gigabit VDSL2 Modem Router (Annex B) User Guide
4.16.1 IPv6 Rule
Choose menu “IPv6 Firewall”
→
“IPv6 Rule”, and then you can view and set Access Control
rules in the screen as shown in Figure 4-88.
Figure 4-88
 Enable IPv6 Firewall: Select the check box to enable the IPv6 Firewall function, so the
Default Filtering Rules can take effect.
 Description: Here displays the description of the IPv6 rule and this name is unique.
 IPv6 LAN Host: Here displays the LAN host selected in the corresponding rule.
 Target: Here displays the target selected in the corresponding rule.
 Schedule: Here displays the schedule selected in the corresponding rule.
 Status: Here displays the status of the rule either enabled or disabled.
 Edit: Here you can edit or delete an existing rule.
To add a new IPv6 rule:
1. Click the Add New button, and you will see the screen as shown in Figure 4-89.
Figure 4-89
2. Give a name (e.g. Rule_1) for the rule in the Description field.
3. Select a host from the IPv6 LAN Host drop-down list or choose “Add IPv6 LAN Host”.
90