User's Manual

TD-W9980B
N600 Wireless Dual Band Gigabit VDSL2 Modem Router (Annex B) User Guide
• Restore the modem router's settings to factory defaults (system will reboot
automatically).
• Update the configuration with the file (system will reboot automatically.
4.22.10 Statistics
Choose menu “System Tools”
→
“Statistics”, and then you can view the statistics of the Modem
router, including total traffic and current traffic of the last Packets Statistic Interval.
Figure 4-117
 Statistics Status: Enable or Disable. The default value is disabled. To enable it, click the
Enable. If it is disabled, the function of DoS protection in Security settings will be disabled.
 Statistics Interval (5-60): The default value is 10. Select a value between 5 and 60 seconds
in the drop-down list. The Packets Statistic interval indicates the time section of the packets
statistic.
Click Reset All to reset the values of all the entries to zero.
Click Delete All to delete all entries in the table.
Click the Refresh button to refresh immediately.
Statistics Table:
IP/MAC Address The IP and MAC address are displayed with related statistics.
Total
Packets
The total number of packets received and transmitted by the
modem router.
Bytes
The total number
of bytes received and transmitted by the
modem router.
Current
Packets
The total number of packets received and transmitted in the last
Packets Statistic interval seconds.
Bytes
The total number of bytes received and transmitted in the last
Packets Statistic interval seconds.
ICMP
Tx
The number of the ICMP packets transmitted to WAN per second
at the specified Packets Statistics interval. It is shown like
“current transmitting rate / Max transmitting rate”.
107