User's Guide

TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide

¾ Gateway - The gateway should be in the same subnet as your IP address.

¾ MAC Address - the physical address of the AP, as seen from the LAN. The value can't be

changed.

)

Note:

1 If you change the IP Address, you must use the new IP Address to log in the AP.

2 If you select the type of Dynamic IP (DHCP), the DHCP server in this device will no startup.

3 If the new IP address you set is not in the same subnet, the IP Address pool in the DHCP

server will not take effect, until they are re-configured.

4 The device will reboot automatically after you click the Save button.

3.5 Wireless

Figure 3-7 Wireless menu

There are six submenus under the Wireless menu (shown in Figure 3-7): Wireless Settings,

Wireless Security, Wireless MAC Filtering, Wireless Advanced, Throughput Monitor and

Wireless Statistics. Click any of them, and you will be able to configure the corresponding

function. The detailed explanations for each submenu are provided below.

3.5.1 Wireless Settings

This page allows you to configure the wireless mode for your device. The wireless settings for the

wireless network in each operation mode are set on this page. Six operation modes are supported

here, including Access Point, Multi-SSID, Client, Repeater, Universal Repeater and Bridge

with AP. The available setting options for each operation mode are different from those of the

other.