User's Guide

TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide
)
Note:
Limited by local law regulations, version for North America does not have region selection
option.
¾ Channel Width - Select the channel width from the pull-down list.
¾ Enable Wireless Radio - The wireless radio of this device can be enabled or disabled by
selecting or deselecting this checkbox.
Click the Search button to detect the SSIDs in the local area.
)
Note:
To apply any settings you have altered on the page, please click the Save button, and then you
will be reminded to reboot the device.
4) Repeater: This mode allows the AP with its own BSS to relay data to a root AP to which it is
associated with WDS enabled. The wireless repeater relays signal between its stations and
the root AP for greater wireless range.
Figure 3-11 Wireless Settings in Repeater mode
¾ MAC of AP - Enter the MAC address of the root AP of which you want to expand wireless
range.
¾ Region - Select your region from the pull-down list. This field specifies the region where the
wireless function of the device can be used. It may be illegal to use the wireless function of
the device in a region other than one of those specified in this field. If your country or region
is not listed, please contact your local government agency for assistance.
When you select your local region from the pull-down list, click the Save button, then the
Note Dialog appears. Click OK.
25