User's Guide

TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide

6) Bridge with AP: This mode can bridge the AP and up to 4 APs also in bridge mode to

connect two or more wired LANs.

Figure 3-13 Wireless Settings in Repeater mode

¾ SSID - Enter a value of up to 32 characters. The same name (SSID) must be assigned to all

wireless devices in your network. The default SSID is TP-LINK_xxxxxx (xxxxxx indicates the

last six unique characters of each device’s MAC address). This value is case-sensitive. For

example, TP-LINK is NOT the same as tp-link.

¾ Region - Select your region from the pull-down list. This field specifies the region where the

wireless function of the device can be used. It may be illegal to use the wireless function of

the device in a region other than one of those specified in this field. If your country or region

is not listed, please contact your local government agency for assistance.

When you select your local region from the pull-down list, click the Save button, then the

Note Dialog appears. Click OK.