User's Guide

TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide
provides the TCP/IP configuration for all the PCs that are connected to the system on the LAN.
The DHCP Server can be configured on the page (shown in Figure 3-26):
Figure 3-26 DHCP Settings
¾ DHCP Server - Enable or Disable the server. If you disable the Server, you must have
another DHCP server within your network or else you must configure the IP address of the
computer manually. This function is disabled by default.
¾ Start IP Address - This field specifies the first address in the IP Address pool. 192.168.1.100
is the default start IP address.
¾ End IP Address - This field specifies the last address in the IP Address pool. 192.168.1.199
is the default end IP address.
¾ Address Lease Time - The Address Lease Time is the amount of time a network user will
be allowed connection to the system with their current dynamic IP Address. Enter the amount
of time, in minutes, the user will be "leased" this dynamic IP Address. The range of the time is
1 ~ 2880 minutes. The default value is 120 minutes.
¾ Default Gateway - (Optional.) Input the IP Address of the gateway.
¾ Default Domain - (Optional.) Input the domain name of your network.
¾ Primary DNS - (Optional.) Input the DNS IP address provided by your ISP. Or consult your
ISP.
¾ Secondary DNS - (Optional.) Input the IP address of another DNS server if your ISP provides
two DNS servers.
Click Save to save the changes.
)
Note:
1 When the device is working on Dynamic IP mode, the DHCP Server function will be disabled.
47