TL-WA7110ND 150Mbps High Power Wireless Access Point REV1.0.
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2014 TP-LINK TECHNOLOGIES CO., LTD.
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Canadian Compliance Statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1)This device may not cause interference, and (2)This device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme aux norms CNR exemptes de Canada.
安全諮詢及注意事項 ●請使用原裝電源供應器或只能按照本產 品注明的電源類型使用本產 品。 ●清 潔本產 品之前請先拔掉電源線。請勿使用液體、噴霧清 潔劑或濕布進行清 潔。 ●注意防潮,請勿將水或其他液體潑灑到本產 品上。 ●插 槽與開口供通風使用,以確保本產 品的操作可靠並防止過熱,請勿堵塞或覆蓋開口。 ●請勿將本產 品置放於靠近熱源的地方。除非有正常的通風,否則不可放在密閉位置中。 ●請不要私自打開機殼,不要嘗試自行維修本產 品,請由授權的專業人士進行此項工作。 Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам нормативних документів та вимогам, що передбачені чинними законодавчими актами України.
TP-LINK TECHNOLOGIES CO., LTD DECLARATION OF CONFORMITY For the following equipment: Product Description: 150Mbps High Power Wireless Access Point Model No.
CONTENTS Package Contents ................................................................................................................................. 1 Chapter 1. Introduction .................................................................................................................... 2 1.1 Overview of the Product........................................................................................................... 2 1.2 Features ........................................................
4.6 Network .................................................................................................................................. 42 4.6.1 4.7 LAN................................................................................................................................. 42 Wireless .................................................................................................................................43 4.7.1 Wireless Settings..................................................
5.7.1 Wireless Settings............................................................................................................ 82 5.7.2 Wireless Security............................................................................................................ 86 5.7.3 MAC Filtering..................................................................................................................88 5.7.4 Wireless Advanced............................................................................
5.17.1 Time Settings ............................................................................................................... 121 5.17.2 Diagnostic.....................................................................................................................122 5.17.3 Firmware Upgrade........................................................................................................ 123 5.17.4 Factory Defaults ..........................................................................
TL-WA7110ND 150Mbps High Power Wireless Access Point User Guide Package Contents The following items should be found in your package: One TL-WA7110ND 150Mbps High Power Wireless Access Point One power Adapter for TL-WA7110ND 150Mbps High Power Wireless Access Point One Power Injector Mounting Kits Quick Installation Guide One Resource CD for Access Point, including: This User Guide Other helpful information TL-WA7110ND 150Mbps High Power Wireless Note: Make sure that t
TL-WA7110ND 150Mbps High Power Wireless Access Point User Guide Chapter 1. 1.1 Introduction Overview of the Product The TL-WA7110ND 150Mbps High Power Wireless Access Point will allow you to connect your network with other wireless devices wirelessly, sharing Internet Access, files and fun, easily and securely. The high power design will also help you build a more stable link or cover more area indoors.
TL-WA7110ND 150Mbps High Power Wireless Access Point User Guide Supports configuration backup/restore and firmware upgrade. Supports Web management. Supports Remote Management. Supports UPnP, Dynamic DNS, Static Routing, VPN Pass-through. Supports Virtual Server, Special Application and DMZ host. Built-in firewall supporting IP address filtering, Domain Name filtering, and MAC address filtering.
TL-WA7110ND 150Mbps High Power Wireless Access Point User Guide 1.3 Conventions The AP or TL-WA7110ND, or device mentioned in this User guide stands for TLWA7110ND 150Mbps High Power Wireless Access Point without any explanations. Parameters provided in the pictures are just references for setting up the product, which may differ from the actual situation. You can set the parameters according to your demand. 1.4 Panel Layout 1.4.
TL-WA7110ND 150Mbps High Power Wireless Access Point User Guide 1.4.2 The Rear Panel Figure 1-2 Rear Panel sketch Viewed from left to right, the following parts are located on the rear panel of TL-WA7110ND. POWER: The power port connects to the power adapter provided with the TL-WA7110ND. MAIN (PoE): One LAN 10/100Mbps RJ45 port connects to a network device, such as a switch or a router, and is capable of 12V Power over Ethernet output.
TL-WA7110ND 150Mbps High Power Wireless Access Point User Guide Chapter 2. 2.1 Connecting the Device System Requirements Each PC in the LAN needs a working Ethernet Adapter and an Ethernet cable with RJ45 connectors. TCP/IP protocol must be installed on each PC. Web browser, such as Microsoft Internet Explorer 5.0 or later, Netscape Navigator 6.0 or later. If the device is configured to AP Client Router mode, you also need: Wireless Internet Service Provider (WISP).
TL-WA7110ND 150Mbps High Power Wireless Access Point User Guide 1. Connect the MAIN (PoE) port of TL-WA7110N to the POE port of the Power Injector with an Ethernet cable. 2. Connect the PC to the LAN port of the Power Injector with an Ethernet cable. 3. Plug one end of the Power Adapter into the DC jack on the Power Injector, and the other end in electrical wall socket. 4. Power on the PC(s) and notebook(s). 2.3.2 AP Router Figure 2-2 Hardware Installation of the TL-WA7110ND in AP Router mode 1.
TL-WA7110ND 150Mbps High Power Wireless Access Point User Guide 2.3.4 Multi-SSID In this mode, AP can support up to 4 SSID. Figure 2-4 Hardware Installation of the TL-WA7110ND in Multi-SSID mode 1. Connect the MAIN (PoE) port of TL-WA7110N to the POE port of the Power Injector with an Ethernet cable. 2. Connect the LAN port of the Power Injector to the wired network port with an Ethernet cable. 3.
TL-WA7110ND 150Mbps High Power Wireless Access Point User Guide Figure 2-6 Hardware Installation of the TL-WA7110ND in Standard AP -- Bridge mode 1. Connect the MAIN (PoE) port of TL-WA7110N to the POE port of the Power Injector with an Ethernet cable. 2. Plug one end of the Power Adapter into the DC jack on the Power Injector, and the other end in electrical wall socket. 3. Power on the PC(s).
TL-WA7110ND 150Mbps High Power Wireless Access Point User Guide Chapter 3. Quick Installation Guide This Chapter will guide you to configure the AP to function in your network and gain access to the internet through your ISP immediately after successful configuration. More detailed description of the AP’s web-based utility and functions can be found in “Chapter 4 Configuring the AP” 3.1 Configure the Device The instructions in this section will help to be able to communicate with the AP.
TL-WA7110ND 150Mbps High Power Wireless Access Point User Guide 2) Power off the AP and PC. Then turn on the AP and restart the PC. The built-in DHCP server will assign IP address for the PC. Note: For Windows 98 OS or earlier, the PC and AP may need to be restarted. Now, you can run the Ping command in the command prompt to verify the network connection between your PC and the AP. The following example is in Windows 2000 OS. Open a command prompt, and type ping 192.168.0.254, and then press Enter.
11
TL-WA7110ND 150Mbps High Power Wireless Access Point User Guide Open your web browser and enter the IP address of the AP (192.168.0.254) and a login screen will display (shown in Figure 3-3). Figure 3-3 Login the router Enter admin for Username and Password (both in lower case letters) on the following login screen. Click OK or press Enter of your keyboard, and the management page will display.
TL-WA7110ND 150Mbps High Power Wireless Access Point User Guide Figure 3-6 Quick Setup Click Next, and then Operation Mode page will appear, shown in Figure 3-7: Figure 3-7 Operation Mode AP Client Router - In this mode, the device enables multi-users to share Internet from WISP. The LAN port devices share the same IP from WISP through Wireless port. While connecting to WISP, the Wireless port works as a WAN port at AP Client Router mode. The Ethernet port acts as a LAN port.
TL-WA7110ND 150Mbps High Power Wireless Access Point User Guide Note: When you change the operation mode to Client/Repeater, WPS function will stay disabled. Please manually enable this function if needed when you switch back to Access Point/Multi-SSID/Bridge mode. 3.2.1 AP Client Router When you choose AP Client Router Mode on Operation Mode page in Figure 3-7 , take the following steps: 1. Click Next in Figure 3-7, and then WAN Connection Type page will appear as shown in Figure 3-8.
TL-WA7110ND 150Mbps High Power Wireless Access Point User Guide Figure 3-10 WISP Station Setting Wireless Name of WISP Station - The SSID of the AP your Device is going to connect to as a client. You can also use the search function to select the SSID to join. MAC Address of WISP Station - The BSSID of the AP your Device is going to connect to as a client. You can also use the search function to select the BSSID to join.
TL-WA7110ND 150Mbps High Power Wireless Access Point User Guide Wireless Security Mode - This option should be chosen according to the AP's security configuration. It is recommended that the security type is the same as your AP's security type. Wireless Password - If the AP your Device is going to connect needs password, you need to fill the password in this blank.
TL-WA7110ND 150Mbps High Power Wireless Access Point User Guide Figure 3-12 AP List 3. The page below will appear. Create a name for the Local Wireless Network. The security settings for the local network will be set the same as your WISP by default. Then click Next. Figure 3-13 Local Wireless AP Setting Ticking off Use the same security settings for the local wireless network as the remote WISP station, the page will show as below.
TL-WA7110ND 150Mbps High Power Wireless Access Point User Guide Figure 3-15 Finish page 3.2.2 AP Router When you choose AP Router Mode on Operation Mode page in Figure 3-7, take the following steps: 1. Click Next in Figure 3-7, and then WAN Connection Type page will appear as shown in Figure 3-16. Figure 3-16 WAN Connection Type PPPoE - If you have applied ADSL to realize Dial-up service, you should choose this type.
18
TL-WA7110ND 150Mbps High Power Wireless Access Point User Guide Figure 3-17 PPPoE 2) Enter the User Name and Password provided by your ISP and then click Next, Figure 3-18 will appear. Figure 3-18 Wireless Wireless Network Name(SSID) - Enter a string of up to 32 characters. The same Name (SSID) must be assigned to all wireless devices in your network.
TL-WA7110ND 150Mbps High Power Wireless Access Point User Guide Note: Ensure you select a correct country to comply with local laws. Incorrect settings may cause interference. Limited to local law of the United States, selecting country code and channel function was disabled. Transmission Power - The available options of transmission power are determined by the region selected.
TL-WA7110ND 150Mbps High Power Wireless Access Point User Guide Note: It is strongly recommended to restart the Cable Modem after the Quick Setup is done. This important operation will solve most issues. 2) Choose to clone MAC address or not, if you are unsure, please select YES. Then click Next, and you will come to the page shown in Figure 3-18. Static IP - In this type, you should manually fill in the IP address, Subnet Mask, Default Gateway, and DNS IP address, which are specified by your ISP.
TL-WA7110ND 150Mbps High Power Wireless Access Point User Guide Figure 3-21 Finish page 3.2.3 Point Access When you choose Access Point on Operation Mode page in Figure 3-7, take the following steps: 1. Click Next in Figure 3-7, and then Wireless page will appear as shown in Figure 3-22. Create an easy-to-remember name for your wireless network. Select Most Secure (WPA/WPA2-PSK) mode and enter a wireless password below to prevent unauthorized access to your AP. Then click Next.
TL-WA7110ND 150Mbps High Power Wireless Access Point User Guide in a region other than one of those specified in this filed. If your country or region is not listed, please contact your local government agency for assistance. When you select your local region from the pull-down list, the Note Dialog of TERMS OF USE will pop up. Select I agree to these terms of use, and click Accept to continue. Note Dialog Note: Ensure you select a correct country to comply with local laws.
TL-WA7110ND 150Mbps High Power Wireless Access Point User Guide Failure to follow these guidelines can result in significant performance degradation or inability to wirelessly connect to the Device. 2. The Network Setting page will appear then. It is recommended that you keep the default settings on this page. Click Next. Figure 3-23 Network 3. When you finish the wireless setting in Figure 3-23 and click Next, then Figure 3-24 will appear, where you can click Finish button to complete the Quick Setup.
TL-WA7110ND 150Mbps High Power Wireless Access Point User Guide 3.2.4 Multi-SSID When you choose Multi-SSID on Operation Mode page in Figure 3-7, take the following steps: 1. Click Next in Figure 3-7, and then Wireless page will appear as shown in Figure 3-25. Select Enable VLAN. Create different SSIDs and enter the password separately for your VLANs depending on the security requirements for your wireless networks. Click Save button to make each configuration take effect. Click Next to continue.
TL-WA7110ND 150Mbps High Power Wireless Access Point User Guide SSID - Enter a value of up to 32 characters. The same Name (SSID) must be assigned to all wireless devices in your network. In Multi-SSID operation mode, enter SSID for each BSS in the field "SSID1" ~ "SSID4". VLAN ID - The ID of a VLAN. Only in the same VLAN can a Wireless PC and a wired PC communicate with each other. The value can be between 1 and 4095.
TL-WA7110ND 150Mbps High Power Wireless Access Point User Guide Figure 3-26 Network 3. When you finish the wireless setting in Figure 3-26 and click Next, then Figure 3-27 will appear, where you can click Finish button to complete the Quick Setup.
TL-WA7110ND 150Mbps High Power Wireless Access Point User Guide 3.2.5 Repeater (Range Extender) When you choose Repeater (Range Extender) on Operation Mode page in Figure 3-7, take the following steps: 1. Click Next in Figure 3-7, and then Wireless page will appear as shown in Figure 3-28. Click Survey button to scan the wireless networks. Figure 3-28 Wireless Enable WDS - The AP client can connect to AP with WDS enabled or disabled.
TL-WA7110ND 150Mbps High Power Wireless Access Point User Guide Note Dialog Note: Ensure you select a correct country to comply with local laws. Incorrect settings may cause interference. Limited to local law of the United States, selecting country code and channel function was disabled. Transmission Power - The available options of transmission power are determined by the region selected.
TL-WA7110ND 150Mbps High Power Wireless Access Point User Guide Figure 3-29 AP List You will then return to the Wireless page as shown in Figure 3-28. The security mode will be selected automatically, please confirm it and enter the same password as is on your router or access point, then click Next. 3. The Network Setting page will appear then. It is recommended that you keep the default settings on this page. Click Next. Figure 3-30 Network 4.
TL-WA7110ND 150Mbps High Power Wireless Access Point User Guide Figure 3-31 Finish page 3.2.6 AP Bridge with When you choose Bridge with AP on Operation Mode page in Figure 3-7, take the following steps: 1. Click Next in Figure 3-7, and then Wireless page will appear as shown in Figure 3-32. Click Survey button to scan the wireless networks.
TL-WA7110ND 150Mbps High Power Wireless Access Point User Guide Enable WDS - The AP client can connect to AP with WDS enabled or disabled. If WDS is enabled, all traffic from wired networks will be forwarded in the format of WDS frames consist of four address fields. If WDS is disabled, three address frames are used. If your AP supports WDS well, please select the option. Wireless Name of Remote AP - The SSID of the AP your Device is going to connect to as a client.
TL-WA7110ND 150Mbps High Power Wireless Access Point User Guide Key Format - This option should be chosen if the Security Mode is WEP. It indicates the format of the WEP key. WEP Index - This option should be chosen if the Security Mode is WEP. It indicates the index of the WEP key. Wireless Password - If the AP your Device is going to connect needs password, you need to fill the password in this blank.
TL-WA7110ND 150Mbps High Power Wireless Access Point User Guide 4. The Network Setting page will appear then. It is recommended that you keep the default settings on this page. Click Next. Figure 3-35 Network 5. When you finish the wireless setting in Figure 3-35 and click Next, then Figure 3-36 will appear, where you can click Finish button to complete the Quick Setup.
TL-WA7110ND 150Mbps High Power Wireless Access Point User Guide 3.2.7 Client When you choose Client on Operation Mode page in Figure 3-7, take the following steps: 1. Click Next in Figure 3-7, and then Wireless page will appear as shown in Figure 3-37. Click Survey button to scan the wireless networks. Figure 3-37 Wireless Enable WDS - The AP client can connect to AP with WDS enabled or disabled.
35
TL-WA7110ND 150Mbps High Power Wireless Access Point User Guide Note Dialog Note: Ensure you select a correct country to comply with local laws. Incorrect settings may cause interference. Limited to local law of the United States, selecting country code and channel function was disabled. Transmission Power - The available options of transmission power are determined by the region selected. Wireless Security Mode - This option should be chosen according to the AP's security configuration.
TL-WA7110ND 150Mbps High Power Wireless Access Point User Guide Figure 3-38 AP List You will then return to the Wireless page as shown in Figure 3-37. The security mode will be selected automatically, please confirm it and enter the same password as is on your router or access point, then click Next. 3. The Network Setting page will appear then. It is recommended that you keep the default settings on this page. Click Next. Figure 3-39 Network 4.