User's Manual
Table Of Contents
- EN 301 489-1 V1.9.2 & EN 301 489-17 V2.2.1
- Yang Hongliang
- CONTENTS
- Package Contents
- Chapter 1 Introduction
- Chapter 2 Hardware Installation
- Chapter 3 Quick Installation Guide
- Chapter 4 Configure the Device
- Appendix A: Application Example
- Appendix B: Factory Defaults
- Appendix C: Troubleshooting
- Appendix D: Specifications
- Appendix E: Glossary
TL-WA801ND 300Mbps Wireless N Access Point User Guide
10
Figure 3-5 Wireless Setting - Access Point mode
1) Create an easy-to-remember name for your wireless network, write it into Wireless
Network Name(SSID).
2) Select Channel for your device.
3) Select Most Secure (WPA/WPA2-PSK) encryption mode and enter a password below to
prevent unauthorized access to your AP.
4) Click Next, you will then come to Network Setting page for furthers configuration.
B. When you choose Repeater(Range Extender) mode, the Wireless Setting page will be
shown in Figure 3-6.
Figure 3-6 Wireless Setting – Repeater(Range Extender) mode