User's Manual

TL-WA801ND 300Mbps Wireless N Access Point User Guide
28

Channel Width - Determines the channel width to be used. It is unnecessary to change the
default value unless required.

Max Tx Rate - You can limit the maximum tx rate of the AP through this field.

Enable Wireless Radio - Select or deselect this check box to allow or deny wireless stations
to access the device.

Enable SSID Broadcast - Select or deselect this check box to allow or deny the device to
broadcast its name (SSID) on the air. If it’s allowed, when wireless clients survey the local
area for wireless networks to associate with, they will detect the SSID broadcast by the
device.

Note:
To apply any settings you have altered on the page, please click the Save button, and then you
will be reminded to reboot the device.
2) Multi-SSID: This mode allows the device to support up to four SSIDs.
Figure 4-22 Wireless Settings in Multi-SSID mode

Enable VLAN - Check this box and then you can change the VLAN ID of each SSID. If you
want to configure the Guest and Internal networks on VLAN, the switch you are using must
support VLAN. As a prerequisite step, configure a port on the switch for handling VLAN
tagged packets as described in the IEEE802.1Q standard, and enable this field.