User's Manual

TL-WA801ND 300Mbps Wireless N Access Point User Guide
37
Local Wireless AP Setting

Local Wireless Name - Name for the AP.
Figure 4-29 Note Dialog
Channel - Determines the operating frequency to be used. It is not necessary to change the
wireless channel unless you notice interference problems with another nearby access point.
 Mode - This field determines the wireless mode which the device works on.
•
11b only - Only 802.11b wireless stations can connect to the device.
•
11g only - Only 802.11g wireless stations can connect to the device.
•
11n only - Only 802.11n wireless stations can connect to the device.
•
11bg mixed - Both 802.11b and 802.11g wireless stations can connect to the device.
•
11bgn mixed - All 802.11b, 802.11g and 802.11n wireless stations can connect to the
device.

Channel Width - Determines the channel width to be used. It is unnecessary to change the
default value unless required.

Enable Wireless Radio - Select or deselect this check box to allow or deny wireless stations
to access the device.

Enable SSID Broadcast - Select or deselect this check box to allow or deny the device to
broadcast its name (SSID) on the air. If it’s allowed, when wireless clients survey the local
area for wireless networks to associate with, they will detect the SSID broadcast by the
device.

Note:
To apply any settings you have altered on the page, please click the Save button, and then you
will be reminded to reboot the device.