User's Manual
Table Of Contents
- EN 301 489-1 V1.9.2 & EN 301 489-17 V2.2.1
- Yang Hongliang
- CONTENTS
- Package Contents
- Chapter 1 Introduction
- Chapter 2 Hardware Installation
- Chapter 3 Quick Installation Guide
- Chapter 4 Configure the Device
- Appendix A: Application Example
- Appendix B: Factory Defaults
- Appendix C: Troubleshooting
- Appendix D: Specifications
- Appendix E: Glossary
TL-WA801ND 300Mbps Wireless N Access Point User Guide
40
Note:
1.
If you do not set the key, the wireless security function is still disabled even if you have
selected Shared Key as Authentication Type.
2.
You will be reminded to reboot the device after clicking the Save button.
2) Multi-SSID
Figure 4-31 Wireless Security – Multi-SSID
You can choose which SSID to configure wireless security settings for in the blank behind
Operation Mode.
Disable Security - Check this box radio button to disable wireless security. If disabled, the
wireless stations will be able to connect this device without encryption. It is strongly
recommended that you choose one of the security types to enable security.
WPA/WPA2-Personal(Recommended) - Select WPA/WPA2 based on Radius Server.
•
Version - You can select one of following versions.
1)
Automatic(Recommended) - Select WPA-Personal or WPA2-Personal automatically
based on the wireless station's capability and request.
2)
WPA-PSK - Pre-shared key of WPA.
3)
WPA2-PSK - Pre-shared key of WPA2.
•
Encryption - You can select either Automatic(Recommended), TKIP or AES.
•
Wireless Password - You can enter ASCII or Hexadecimal characters. For
Hexadecimal, the length should be between 8 and 64 characters; for ASCII, the length
should be between 8 and 63 ch
aracters.