User's Manual
Table Of Contents
- EN 301 489-1 V1.9.2 & EN 301 489-17 V2.2.1
- Yang Hongliang
- CONTENTS
- Package Contents
- Chapter 1 Introduction
- Chapter 2 Hardware Installation
- Chapter 3 Quick Installation Guide
- Chapter 4 Configure the Device
- Appendix A: Application Example
- Appendix B: Factory Defaults
- Appendix C: Troubleshooting
- Appendix D: Specifications
- Appendix E: Glossary
TL-WA801ND 300Mbps Wireless N Access Point User Guide
41
•
Group Key Update Period - Specify the group key update interval in seconds. The value
can be either 0 or at least 30. Enter 0 to disable the update.
WPA/WPA2-Enterprise - Select WPA/WPA2 based on Radius Server.
•
Version - You can select one of following versions.
1) Automatic - Select WPA or WPA2 automatically based on the wireless station's
capability and request.
2)
WPA - Wi-Fi Protected Access.
3)
WPA2 - WPA version 2.
•
Encryption - You can select either Automatic, TKIP or AES.
•
Radius Server IP - Enter the IP address of the Radius Server.
•
Radius Port - Enter the port used by radius service.
•
Radius Password - Enter the password for the Radius Server.
Group Key Update Period - Specify the group key update interval in seconds. The value can be
either 0 or at least 30. Enter 0 to disable the update.
Note:
You will be reminded to reboot the device after clicking the Save button.
3) Client
Figure 4-32 Wireless Security – Client