User's Manual
Table Of Contents
- EN 301 489-1 V1.9.2 & EN 301 489-17 V2.2.1
- Yang Hongliang
- CONTENTS
- Package Contents
- Chapter 1 Introduction
- Chapter 2 Hardware Installation
- Chapter 3 Quick Installation Guide
- Chapter 4 Configure the Device
- Appendix A: Application Example
- Appendix B: Factory Defaults
- Appendix C: Troubleshooting
- Appendix D: Specifications
- Appendix E: Glossary
TL-WA801ND 300Mbps Wireless N Access Point User Guide
56
There are nine submenus under the System Tools menu (shown as Figure 4-45): Time Settings,
Diagnostic, Ping Watch Dog, Firmware Upgrade, Factory Defaults, Backup & Restore,
Reboot, Password, System Log and Statistics. Clicking any of them will enable you to configure
the corresponding function. The detailed explanations for each submenu are provided below.
4.8.1
SNMP
Figure 4-45 The System Tools menu
Selecting System Tools > SNMP to enable this function will allow the network management
station to retrieve statistics and status from the SNMP agent in this device. Simple Network
Management Protocol (SNMP) is a popular network monitoring and management protocol, used to
refer to a collection of specifications for network management that include the protocol itself. To
use this function, select Enable and enter the following parameters in Figure 4-46.
Figure 4-46 SNMP Settings