User's Manual

TL-WA701ND/TL-WA801ND/TL-WA901ND
Wireless N Access Point User Guide
54
 SysName - An administratively-assigned name for this managed node.
 SysLocation - The physical location of this node.

Note:
Specifying one of these values via the Device's Web-Based Utility makes the corresponding object
read-only. If there isn't such a config setting, then the write request will succeed (assuming
suitable access control settings), but the new value would be forgotten the next time the agent was
restarted.
 Get Community - Enter the community name that allows Read-Only access to the Device's
SNMP information. The community name can be considered a group password. The default
setting is “public”.
 Get Source - Get source defines the IP address or subnet for management systems that can
read information from this 'get' community device.
 Set Community - Enter the community name that allows Read/Write access to the Device's
SNMP information. The community name can be considered a group password. The default
setting is “private”.
 Set Source - Set source defines the IP address or subnet for management systems that can
control this 'set' community device.

Note:
A restricted source can be a specific IP address (e.g. 10.10.10.1), or a subnet - represented as
IP/BITS (e.g. 10.10.10.0/24). If an IP Address of 0.0.0.0 is specified, the agent will accept all
requests under the corresponding community name.
Click the Save button to save your settings.