User's Guide

26
Chapter 4
Congure the Access Point
Repeater/Bridge Mode
4. Go to Wireless > Connect to Network.
• SSID (to be bridged) - Enter the case-sensitive SSID of the host network which the
extender wille be connecting to or click Wireless Scanner and select a Wi-Fi network.
• MAC Address (to be bridged) - Enter the MAC Address of the host network which the
extender will be connecting to or click Wireless Scanner and select a Wi-Fi nework.
• Security - Select one of the security options to match with the host network.
• No Security - This option disables the wireless security.
• WPA-PSK - This option supports implementation of the WPA (Wi-Fi Protected
Access) standard. It is recommended.
• Password - You can enter ASCII or Hexadecimal characters. For Hexadecimal, the length should
be between 8 and 64 characters; for ASCII, the length should be between 8 and 63 characters.
• WPA2-PSK - This option supports implementation of the WPA2 (Wi-Fi Protected
Access) standard. It is also recommended.
• Password - You can enter ASCII or Hexadecimal characters. For Hexadecimal, the length should
be between 8 and 64 characters; for ASCII, the length should be between 8 and 63 characters.
• WEP - This option is the most basic form of wireless security that can be used
if your client devices can only access wireless using WEP (Wireless Equivalent
Privacy).
• Index - Select which of the four keys will be used.
• Autentication Type - Select Shared Key or Open System authentication type.
• WEP KeyFormat - Select ASCII or Hexadecimal format.
• Password - Enter the matching WEP key information for your network.
Note:
To apply any settings you have altered on the page, please click the Save button, and then you will be reminded to reboot
the device.