User's Guide

27
Chapter 4
Congure the Access Point
Client Mode
• Enable WDS - The AP client can connect to AP with WDS enabled or disabled. If WDS
is enabled, all traffic from wired networks will be forwarded in the format of WDS
frames consisting of four address fields. If WDS is disabled, three address frames are
used. If your AP supports WDS well, please enable this option.
• Wireless Name of Root AP - Enter the SSID of AP that you want to access or click
Survey to find the network you want to connec to.
• MAC Address of Root AP - Enter the MAC address of AP that you want to access.
• Enable Wireless Radio - Select or deselect this check box to enable or disable wireless
function.
• Click the Survey button to detect the SSIDs in the local area.
Note:
To apply any settings you have altered on the page, please click the Save button, and then you will be reminded to reboot
the device.
WDS Repeater Mode
• Wireless Name of Root AP - Enter the SSID of AP that you want to access or click
Survey to find the network you want to connect to.
• MAC Address of Root AP - Enter the MAC address of AP that you want to access.
• Mode - Select the desired wireless mode. The options are: