User's Guide

4
Chapter 1
Get to Know About Your Access Point
LED Explanation
Name Status Indication
(Power)
On Power is on.
Flashing
The system is starting up or the firmware is being upgraded. Do not
disconnect or power off your access point.
Off Power is off.
(Wireless)
On The wireless function is enabled.
Off The wireless function is disabled.
(Ethernet)
On The ETHERNET port is connected to a powered-on device.
Off The ETHERNET port is not connected to a powered-on device.
(WPS)
On/Off
This light remains on for 2 minutes when a WPS connection is
established, then turns off.
Flashing WPS connection is in progress. This may take up to 2 minutes.
1. 2. 2. The Back Panel