User's Guide

5
Chapter 1
Get to Know About Your Access Point
The following parts (view from left to right) are located on the rear panel.
Ports or Buttons Description
ON/OFF To power on or off the access point.
Power For connecting the access point to a power socket via the provided power adapter.
ETHERNET
One LAN 10/100Mbps RJ45 port connects to a network device, such as a switch or
a router.
WPS
If your client devices, such as wireless adapters, support Wi-Fi Protected Setup, then
you can press this button to quickly establish a connection between the access point
and the client devices and automatically configure wireless security for your wireless
network.
RESET Press and hold this button until all the LEDs turn on momentarily.
Antennas
Used for wireless operation and data transmitting. Upright them for the best Wi-Fi
performance.