User's Manual

TL-WA830RE 300Mbps Wireless N Range Extender User Guide
4
z Turn off your Range Extender and unplug the power adapter in a lighting storm to avoid
damage.
z Use Web browser, such as Microsoft Internet Explorer 5.0 or above, Netscape Navigator 6.0
or above.
z Operating temperature of the Range Extender should be 0ć~40ć (32~104).
z Operating humidity of the Range Extender should be 10%~90%RH (Non-condensing).
2.3 Connecting the Device
Figure 2-1 Typical connection of TL-WA830RE ˄in Range Extender mode˅
To establish a typical connection of the Range Extender, please take the following steps:
1. Connect the Cable/DSL modem to a Wireless Router with an Ethernet cable.
2. Place your TL-WA830RE near to the Wireless Router, and then power on it. Connect the
TL-WA830RE to the Wireless Router wirelessly.
3. Connect your Wireless Clients (such as Notebook, iPad, iPhone, etc.) to TL-WA830RE
wirelessly. Or you can connect your PC to the sole LAN port of Range Extender via an
Ethernet cable.
4. Log in the web-based management page of TL-WA830RE and complete the configurations.
(Please refer to Chapter 3 Quick Installation Guide or Chapter 4 Configure the Device
for the
configurations, as you need.)
5. Locate an ideal location for TL-WA830RE, and adjust the direction of the antenna.
(Please refer to Section 2.1 Before You Begin
for detailed information about ideal location.)
)
)
Note:
Above is the typical wireless connection of TL-WA830RE in Range Extender mode. While, if you want
to connect your computer equipped with wireless adapter to a wired network wirelessly. Please
refer to Appendix A: Application Example
.