User's Manual

TL-WA830RE 300Mbps Wireless N Range Extender User Guide
14
¾ Disable PIN of this device - WPS external registrar of entering this device's PIN can be
disabled or enabled manually. If this device receives multiple failed attempts to authenticate
an external Registrar, this function will be disabled automatically.
¾ Add device - You can add a new device to the existing network manually by clicking this
button.
To add a new device:
If the wireless adapter supports WPS, you can establish a wireless connection between wireless
adapter and device using either PBC (Push Button Configuration) method or PIN method.
)
)
Note:
To build a successful connection by WPS, you should also do the corresponding configuration of
the network adapter for WPS function meanwhile. And as for the configuration of the network
adapter, here takes the Wireless Adapter of our company for example.
Method One: Push the button of the Range Extender and Wireless Adapter
Step 1: Keep the “WPS Status” as Enabled and click the Add Device button in Figure 4-2, then
the following screen will appear.
Figure 4-3 Add A New Device
Step 2: Choose “Press the button of the new device in two minutes” and click Connect.
Step 3: For the configuration of the wireless adapter, please choose “Push the button on my
access point or wireless router.” in the configuration utility of the WPS (as shown
below), and click Connect.