User's Manual
Table Of Contents
- Package Contents
- Chapter 1 Introduction
- Chapter 2 Hardware Installation
- Chapter 3 Quick Installation Guide
- Chapter 4 Configure the Device
- Appendix A: Application Example
- Appendix B: Factory Defaults
- Appendix C: Troubleshooting
- Appendix D: Specifications
- Appendix E: Glossary
TL-WA901ND
300Mbps Wireless N Access Point User Guide
10
2. After successfully logging in, the Quick Setup page will display. Click Next to continue.
Figure 3-3 Quick Setup
Note:
If you click Exit and choose to manually configure the AP on your own need, please note that
the DHCP is enabled during the configuration, it is essential to disable DHCP when all the
settings are finished.
3. The Quick Setup Start page will display. Click Next to continue.
Figure 3-4 Quick Setup
4. The Operation Mode page will appear then, shown in Figure 3-5. The TL-WA901ND
supports up to five operation modes.
Figure 3-5 Operation Mode
In Access Point mode, the product will act as a wireless central hub for your wireless
LAN clients, giving a wireless extension for your current wired network.