User's Manual
Table Of Contents
- Package Contents
- Chapter 1 Introduction
- Chapter 2 Hardware Installation
- Chapter 3 Quick Installation Guide
- Chapter 4 Configure the Device
- Appendix A: Application Example
- Appendix B: Factory Defaults
- Appendix C: Troubleshooting
- Appendix D: Specifications
- Appendix E: Glossary
TL-WA901ND
300Mbps Wireless N Access Point User Guide
12
Figure 3-7 Wireless Setting – Repeater(Range Extender) mode
1) Select the Repeater Mode, for example Universal Repeater.
2) Click Survey, then the window displaying a list of available SSIDs will appear in Figure
3-8.
Figure 3-8 AP List
3) Find the SSID of the Access Point / Router or W ISP, and click Connect in the corresponding
row. You will then return to the previous page.
4) Select the security mode and enter the password that is the same as on your router or
access point in Figure 3-7.
5) Click Next, you will then come to Network Settings page for furthers configuration.
C. When you choose Bridge with AP mode, the Wireless Setting page will be shown in
Figure 3-9.