User's Manual
Table Of Contents
- Package Contents
- Chapter 1 Introduction
- Chapter 2 Hardware Installation
- Chapter 3 Quick Installation Guide
- Chapter 4 Configure the Device
- Appendix A: Application Example
- Appendix B: Factory Defaults
- Appendix C: Troubleshooting
- Appendix D: Specifications
- Appendix E: Glossary
TL-WA901ND
300Mbps Wireless N Access Point User Guide
14
Figure 3-10 Wireless Setting – Client mode
1) Click Survey, then the window displaying a list of available SSIDs will appear in Figure
3-8.
2) Find the SSID of the Access Point / Router or W ISP, and click Connect in the corresponding
row. You will then return to the page shown in Figure 3-10.
3) Select the security mode and enter the password that is the same as on the root AP.
4) Click Next, you will then come to Network Settings page for furthers configuration.
E. When you choose Multi-SSID mode, the Wireless Settings page will be shown in Figure
3-11.
Figure 3-11 Wireless Setting – Multi-SSID mode