User's Manual
Table Of Contents
- Package Contents
- Chapter 1 Introduction
- Chapter 2 Hardware Installation
- Chapter 3 Quick Installation Guide
- Chapter 4 Configure the Device
- Appendix A: Application Example
- Appendix B: Factory Defaults
- Appendix C: Troubleshooting
- Appendix D: Specifications
- Appendix E: Glossary
TL-WA901ND
300Mbps Wireless N Access Point User Guide
15
You are suggested to implement Multi-SSID function with a switch that supports Tag VLAN
feature.
For advanced configuration of this step, please refer to explanations of this mode in
4.6.1
Wireless Settings.
6. When you have configured Wireless Settings in step 4, The Network Settings page will
appear then, shown in Figure 3-12. It is recommended that you keep the default settings on
this page.
Figure 3-12 Network Setting
Note:
1. These settings are only for basic wireless parameters, for advanced settings, please refer
to
4.5 Network and 4.7 DHCP.
2. By selecting YES for Change the login account, you can modify your login user name
and password. In this case, it is suggested that you record them in some place easy to
find.
7. Click the Next button. You will then see the Finish page. Here takes the settings for Access
Point mode for example.
Check your settings and click Save to save your settings for future reference.
Click the Finish button to finish the configuration of the Access Point.