User's Guide

Chapter 4



Client Mode

• Enable WDS - The AP client can connect to AP with WDS enabled or disabled. If WDS

is enabled, all traffic from wired networks will be forwarded in the format of WDS

frames consisting of four address fields. If WDS is disabled, three address frames are

used. If your AP supports WDS well, please enable this option.

•

Wireless Name of Root AP - If you select the radio button before Wireless Name of

Root AP

, the AP client will connect to the AP according to SSID. Enter the SSID of AP

that you want to access.

•

MAC Address of Root AP - If you select the radio button before MAC Address of

Root AP

, the AP client will connect to the AP according MAC address. Enter the MAC

address of AP that you want to access.

•

Enable Wireless Radio - Select or deselect this check box to allow or deny wireless

stations to access the device.

• Click the

Survey button to detect the SSIDs in the local area.

Note:

To apply any settings you have altered on the page, please click the Save button, and then you will be reminded to reboot

the device.

WDS Repeater Mode

• Wireless Name of Root AP - If you select the radio button before Wireless Name of

Root AP, the AP client will connect to the AP according to SSID. Enter the SSID of AP

that you want to access.