User's Guide

31
Chapter 4

• 11n only - Only 802.11n wireless stations can connect to the device.
•
11bg mixed - Both 802.11b and 802.11g wireless stations can connect to the
device.
•
11bgn mixed - All 802.11b, 802.11g and 802.11n wireless stations can connect
to the device.
•
Channel Width - Determines the channel width to be used. It is unnecessary to change
the default value unless required.
•
Enable Wireless Radio - Select or deselect this check box to allow or deny wireless
stations to access the device.
Click the
Survey button to detect the SSIDs in the local area.
Note:
To apply any settings you have altered on the page, please click the Save button, and then you will be reminded to reboot
the device.
Bridge with AP Mode
Wireless Bridge Settting
• Wireless Name of Remote AP - If you select the radio button before Wireless Name of
Remote AP, the AP client will connect to the AP according to SSID. Enter the SSID of
AP that you want to access.
•
MAC Address of Remote AP - If you select the radio button before MAC Address of
Remote AP, the AP client will connect to the AP according MAC address. Enter the
MAC address of AP that you want to access.
Click the
Survey button to detect the SSIDs in the local area.