User's Guide

43
Chapter 4

Deny or allow specific wireless client devices to access my
network by their MAC addresses.
For example, you want the wireless client A with the MAC
address 00-0A-EB-B0-00-0B and the wireless client B with the
MAC address 00-0A-EB-00-07-5F to access the access point,
but other wireless clients cannot access the access point.
1. Visit
http://tplinkap.net, and log in using admin (all lowercase)
for both Username and Password.
2. Go to
Wireless > Wireless MAC Filtering.
3. Click Enable to enable the Wireless MAC Filtering function.
4. Select
Allow the stations specified by any enabled entries in
the list to access
as the filtering rule.
5. Delete all or disable all entries if there are any entries already.
6. Click
Add New and fill in the blank.
1 ) Enter the MAC address 00-0A-EB-B0-00-0B/00-0A-EB-
00-07-5F in the MAC Address field.
2 ) Enter wireless client A/B in the Description field.
3 ) Select
Enabled in the Status drop-down list.
4 ) Click
Save and click Back.
7. The configured filtering rules should be listed as the picture
shows below.
Now only client A and client B can access your network.
I want to:
Done!