User's Guide

5
Chapter 1
Get to Know About Your Access Point
Item Description
Power For connecting the access point to a power socket via the provided power adapter.
Ethernet
One LAN 10/100Mbps RJ45 port connects to a network device, such as a switch or
a router.
WPS/RESET
Press and hold this button until SYS LED becomes quick-flash from slow-flash to
reset the access point to its factory default settings.
If you have client devices, such as wireless adapters, that support Wi-Fi Protected
Setup, then you can press this button to quickly establish a connection between the
Access Point and client devices and automatically configure wireless security for
your wireless network.
Antennas
Used for wireless operation and data transmitting. Upright them for the best Wi-Fi
performance.