User's Manual

Chapter 3 Quick Setup Guide

Static IP - This type of connection uses a permanent, fixed (static) IP address that your ISP assigned. In
this type, you should fill in the IP address, Subnet Mask, Default Gateway, and DNS IP address
manually, which are specified by your ISP. Then click Next to proceed.
3. After configuring WAN connection type, the Wireless AP Settings page will appear as shown below.
Create an easy-to-remember name for your wireless network. Select WPA-PSK/WPA2-PSK in the
Security box and enter the PSK Password below to prevent unauthorized access to your AP. Enter the
distance between this device and the furthest client in Distance Setting. Then click Next.
- 21 -