User's Manual

TL-WDR3500 N600 Wireless Dual Band Router
- 49 -
 Add device - You can add a new device to the existing network manually by clicking this
button.
If the wireless adapter supports Wi-Fi Protected Setup (WPS), you can establish a wireless
connection between wireless adapter and Router using either Push Button Configuration (PBC)
method or PIN method.

Note:
To build a successful connection by WPS, you should also do the corresponding configuration of
the new device for WPS function meanwhile.
I. Use the Wi-Fi Protected Setup Button
Use this method if your client device has a Wi-Fi Protected Setup button.
Press the WPS/Reset button on the back panel of the Router, as shown in
Step 1: Figure 4-32. You can also keep the default WPS status as En
abled and click the Add
device button in Figure 4-31. Then choose “Press the button of the new
device in two
minutes” and click Connect, shown in Figure 4-33.
Figure 4-32
Figure 4-33 Add A New Device
Step 2: Press and hold the WPS button of the client device directly.