User Manual

TL-WN310G 54M Wireless Adapter User Guide
- 13 -
Figure 3-5
3. Edit the Advanced tab.
This screen below allows you make advanced configuration for the profile.
Figure 3-6
¾ Power Save Mode -
• Maximum - Selects maximum mode to let the access point buffer incoming
messages for the wireless adapter. The adapter will detect the access point if
any messages are waiting periodically.
• Normal - Normal uses maximum when retrieving a large number of packets,
then switches back to power save mode after retrieving the packets.
• Off - Turns power saving off, thus powering up the wireless adapter continuously
for a short message response time.
¾ 802.11b Preamble: Specifies the preamble setting in 802.11b. The default setting is
Short & Long (access point mode), which allows both short and long headers in the
802.11b frames. The adapter can only use short radio headers if the access point
supports and uses them. Set to Long Only to override allowing short frames.
¾ Wireless Mode: Specifies 2.4 GHz 54 Mbps or 2.4 GHz 11 Mbps operation in an
access point network. The wireless adapter must match the wireless mode of the