User's Manual

TL-WN321G 54M Wireless USB Adapter User Guide
Figure 2-6 Finish
8. After installing the software, Please plug the adapter into your PC. If you need
instructions as to how to do this, please refer to
section 2.2 Hardware Installation. If
you have plugged it into you PC already, please un-plug it and plug it back in. The
OS will automatically detect the adapter and automatically setup the driver for the
adapter. If it does not, please follow the setup steps to finish the driver installation.
After installing the driver successfully, you should see an icon,
or , appear in your
system tray.
2.2 Hardware Installation
1. Connect one end of the USB cable to the Adapter.
2. Connect the other end of the USB cable to the USB port on your computer. Because
the Adapter gets its power from the host, there is no external power supply. The LED
should light up when the Adapter is plugged in and the PC is on.
2.3 Uninstall Software
2.3.1 Uninstall the driver software from your PC
1. On the Windows taskbar, click the Start button, point to Settings, and then click
Control Panel.
2. Double-click the System icon, click on the Hardware tab in the System window that
appears.
3. Click on the Device Manager button, double-click Network Adapters, and then
right-click TL-WN321G 1.0 USB WLAN Adapter.
- 6 -