User's Manual

TL-WN321G 54M Wireless USB Adapter User Guide
To edit a profile, highlight the desired profile name on Profile Name list, and click the
Edit button, the Profile configuration screen will appear shown in figure 3-10.
To delete a profile, highlight the desired profile name on Profile Name list, and click the
Delete button.
To switch to another profile, highlight the desired profile name on Profile Name list,
and click the Activate button.
Note: Do not forget to click the Activate button when you create a new profile for
connection.
3.1.1 Add or Edit a Configuration Profile
To add a new configuration profile, click Add button on the Profile Management tab. To
modify a configuration profile, select the configuration from the Profile list and click Edit.
The Profile Management dialog box will display a screen similar to that shown in Figure
3-2.
1. Edit the Configuration tab
 Profile Name - Identifies the configuration profile. This name must be unique.
Profile names are not case-sensitive.
 SSID - The IEEE 802.11 wireless network name. This field has a maximum limit of
32 characters.
 PSW(Power Save Mode)
• CAM(
Constantly Awake Mode) – Continuous Access Mode.
• PSW(Power
Saving Mode) - Power Saving mode.
 Network Type – Displays the wireless mode, either Ad-hoc or Infrastructure mode
 Preamble - Specifies the preamble setting in 802.11b. The default setting is Auto
Switch (access point mode), which allows both short and long headers in the
802.11b frames. The adapter can only use short radio headers if the access point
supports and uses them.
 RTS Threshold – Default is 2312。
 Fragment Threshold – Default is 2312。
 Ad-hoc mode – Displays the wireless mode, either Only 802.11B or 802.11B/G
mode.
 Channel – Shows the current channel in use. This field determines which operating
frequency will be used.
- 9 -