User's Manual
Table Of Contents
TL-WN321G 54M Wireless USB Adapter User Guide
hexadecimal digits (any combination of 0-9, a-f, A-F) or 5 ASCII characters for 64-bit
(also called 40bits) encryption. You can enter 26 hexadecimal digits (any
combination of 0-9, a-f, A-F) or 13 ASCII characters for 128-bit (also called 104bits)
encryption.
3.2 Link Status
The Link Status tab displays the adapter's current status.
Figure 3-4 Link Status
The following table describes the items found on the Network Status screen.
Status - Shows whether the station is connected to the wireless network, if no
connected, display RF is closed; if connected, display AP name and BSSID.
Extra Info - Shows link status and the current channel in use.
Link Speed - Shows the current max Transfer rate, unit is Mbit/sec.
Throughput - Displays Tx and Rx rate, unit is Kbits/sec.
Link Quality - Shows the quality of the signal..
Signal Strength - Shows the strength of the signal.
3.3 Site Survey
Click the Site Survey tab of the Utility and the Site Survey screen will appear, figure 3-5.
On the Site Survey screen you can scan the Available Infrastructure and Ad Hoc
Networks.
- 11 -