User's Manual

TL-WN321G 54M Wireless USB Adapter User Guide
 Phy_Address - The MAC address of the wireless network adapter.
 SubMask - The subnet mask of the wireless network.
 Default Gateway - The default gateway of the wireless network.
Figure 3-8 About
3.7 An example for application
Suppose you have an installed and using AP, its SSID is ABC and adopts 64-bit
encryption with the key 0123456789. To establish a connection with this AP, you should
follow these steps below:
1. Launch TL-WN321G 1.0 Utility.
2. Click the Profile tab of the utility and click the Add button on the screen that
appears.
3. The Profile configuration screen will appear, please enter Test for the Profile Name,
ABC for the SSID, select Infrastructure for the Network Mode, select WEP for the
Data Encryption and enter 0123456789 for Network key.
4. Click OK to save this profile.
5. Click Activate on the Profile screen. The utility will establish a connection with this
AP by configured profile.
6. Of course, you can select Site Survey tab too, highlight ABC for the SSID, then
connect it, and then do these steps form 3 to 5 above.
- 14 -