User's Manual

TD-W8910G 54M Wireless ADSL2+ Router User Guide

3. MER

If you choose MER in the previous screen (shown in Figure 5-6), you can see the screen

(shown in Figure 5-10). Follow the instructions to configure the connection.

Figure 5-10

1) Configure the WAN IP Address. If you are provided a dynamic IP Address, please select

obtain an IP address automatically, and then the Router will automatically get IP

parameters from your ISP. If you are provided with a static IP Address, please select Use

the following IP Address, and then enter the WAN IP Address and WAN Subnet

Mask.

2) Configure the default gateway. If you are provided a dynamic gateway address, please

select obtain default gateway automatically, and then the Router will automatically get

gateway parameters from your ISP. If you are provided with a static gateway, please

select Use the following default gateway, and then enter the gateway address.

3) Configure the DNS. If you are provided dynamic DNS server addresses, please select

obtain DNS server addresses automatically, then the Router will automatically get

DNS server addresses from your ISP. If you are provided static DNS server addresses,

please select Use the following DNS server addresses, then enter the DNS Server