User's Manual

TD-W8910G 54M Wireless ADSL2+ Router User Guide

Figure 5-34

5.4.6.1. Default Gateway

Choose “Advanced Setup”Æ“Routing”Æ“Default Gateway”, you can see the Default Gateway

screen, this screen allows you to configure the default gateway (shown in Figure 5-35).

Figure 5-35

If the Enable automatic Assigned Default Gateway check-box is selected, this Router will

accept the first received default gateway assignment from one of PPPoA, PPPoE or MER/DHCP

enabled PVC(s). If the check-box is not selected, enter the static Default Gateway IP and/or a

WAN Interface, you can leave the WAN Interface default. Then click Save/Apply button to save

it.

Note:

If changing the Automatic Assigned Default Gateway from unselected to selected, you have to