User's Manual
Table Of Contents
12
Chapter 3
Windows
• Windows 7/8/8.1/10
1. Click , or (Network icon) on the taskbar. Select the Wi-Fi network you want
to join, and click Connect. Enter the network password when prompted.
2. When the network icon changes to or , it indicates a successful network
connection.
Note:
If you do not want to enter the Wi-Fi password, you can also join a wireless network either by pushing the WPS or
QSS button on your router or AP, or entering the PIN of your router when the screen prompts you to do so.
• Windows XP
1. If you have not installed the TP-LINK Utility, go to step 2.
If you have installed the TP-LINK Utility, you need to switch to use the Windows
wireless configuration tool manually using one of the following methods.
Method 1: Right-click (TP-LINK Utility icon) on the taskbar. (If you do not see the
icon, click the hidden icons arrow on the taskbar.) Select Switch to Windows wireless
configuration tool.
Method 2: Open the TP-LINK Utility and select Advanced tab. Select Use Windows
wireless configuration tool. Click OK when it prompts.
2. Right-click (Windows XP Wireless Zero Configuration Utility icon) on the task bar,
and select View Available Wireless Networks.
3. Select the network you want to join, and click Connect. Enter your Wi-Fi password
when prompted.
3. 2. 2. TP-LINK Utility
1. Open TP-LINK Utility . The Network screen displays.