TL-WN822N 300Mbps High Gain Wireless USB Adapter Rev: 5.0.
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2015 TP-LINK TECHNOLOGIES CO., LTD.
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. Canadian Compliance Statement This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻 率、加大功率或變更原設計之特性或功能。 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通行；經發現有干擾現象時，應立 即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信規定作業之無線電信。低功 率射頻電機需忍受合法通信或工業、科學以及醫療用電波輻射性電機設備之干擾。 減少電磁波影響，請妥適使用。 安全諮詢及注意事項 ●請使用原裝電源供應器或只能按照本產品注明的電源類型使用本產品。 ●清潔本產品之前請先拔掉電源線。請勿使用液體、噴霧清潔劑或濕布進行清潔。 ●注意防潮，請勿將水或其他液體潑灑到本產品上。 ●插槽與開口供通風使用，以確保本產品的操作可靠並防止過熱，請勿堵塞或覆蓋開口。 ●請勿將本產品置放於靠近熱源的地方。除非有正常的通風，否則不可放在密閉位置中。 ●請不要私自打開機殼，不要嘗試自行維修本產品，請由授權的專業人士進行此項工作。 Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам
TP-LINK TECHNOLOGIES CO., LTD DECLARATION OF CONFORMITY For the following equipment: Product Description: 300Mbps High Gain Wireless USB Adapter Model No.
CONTENTS Chapter 1 Product Overview ................................................................................. 1 1.1 Introduction ................................................................................................................ 1 1.2 Features..................................................................................................................... 1 1.3 LED Status.................................................................................................................
TL-WN822N 300Mbps High Gain Wireless USB Adapter User Guide Chapter 1 Product Overview 1.1 Introduction The TP-LINK TL-WN822N 300Mbps High Gain Wireless USB Adapter connects your notebook or desktop computer over Wi-Fi to an 11n or other network for applications such as lag-free video streaming, online gaming, and secure Internet surfing. 1.2 Features Supports 802.11n standard Seamlessly compatible with 802.
TL-WN822N 300Mbps High Gain Wireless USB Adapter User Guide Chapter 2 Connect to a Computer Before you begin using your adapter, connect the adapter to your computer. Insert the adapter into a USB port on your computer using the provided USB cable. Note: In Windows XP, a Found New Hardware Wizard window will appear when the adapter is detected. Please click Cancel.
TL-WN822N Chapter 3 300Mbps High Gain Wireless USB Adapter User Guide Install Driver and Utility The Setup Wizard will guide you through the installation procedures. We use the procedures in Windows 7 as an example - the procedures may vary slightly for other versions of Windows. 1. Insert the resource CD into your CD drive and click the Run Autorun.exe from the pop-up AutoPlay window. Select TL-WN822N and click Install Driver and Utility to begin. Note: The CD is included in the package.
TL-WN822N 3. 300Mbps High Gain Wireless USB Adapter User Guide Choose a setup type. It is recommended to select Install TP-LINK Wireless Configuration Utility and Driver. Click Next. 4. If you want to change install location, click Change to specify the location for the software installation. Or you can leave it default. Click Next.
TL-WN822N 5. 300Mbps High Gain Wireless USB Adapter User Guide Click Install. After a few minutes, the installation completes. Click Finish.
TL-WN822N 6. 300Mbps High Gain Wireless USB Adapter User Guide TP-LINK utility pops up after installation. Its icon appears on the desktop as and in the Windows system tray as . You can use the TP-LINK utility to join a Wi-Fi network with your adapter. For more guidance, please refer to Join a Wireless Network.
TL-WN822N Chapter 4 300Mbps High Gain Wireless USB Adapter User Guide Join a Wireless Network There are three options of using the adapter to join a Wi-Fi network. Option 1: TP-LINK Utility TP-LINK Utility lets you easily connect the adapter to a Wi-Fi network and manage the adapter. Option 2: WPS (Wi-Fi Protected Setup) WPS (Wi-Fi Protected Setup) is a network security standard for easily adding computers and other devices to a home network.
TL-WN822N 2. 300Mbps High Gain Wireless USB Adapter User Guide Select the network you want to join from the list on this screen and click Connect. If you want the adapter to automatically connect to the network next time, select the Connect automatically checkbox. Enter your Wi-Fi password when prompted. Note: If your Wi-Fi network is not displayed in the list, you can try to join it by WPS or by adding a profile in the Profile screen. 4.
TL-WN822N 2. 300Mbps High Gain Wireless USB Adapter User Guide The following screen indicates a successful connection by WPS. Click OK. Option 2 1. Press the WPS or QSS button on your router or AP. 2. Open TP-LINK Utility and click WPS tab. Select Push the button on my access point or wireless router and click Connect.
TL-WN822N 300Mbps High Gain Wireless USB Adapter User Guide 3. The following screen indicates a successful connection by WPS. Click OK. PIN Option 1 1. Open TP-LINK Utility and click WPS tab. Select Enter the PIN of my access point or wireless router. Enter the PIN of your router or AP. Click Connect.
TL-WN822N 300Mbps High Gain Wireless USB Adapter User Guide Note: The default PIN of your router or AP is printed on the product label of your router or AP. If you generated a new PIN for your router, please enter the new one. 2. The following screen indicates a successful connection by WPS. Click OK. Option 2 1. Open TP-LINK Utility and click WPS tab. Select Enter the PIN of this device into my access point or wireless router. The screen displays a PIN of the adapter, which is generated randomly.
TL-WN822N 4.3 300Mbps High Gain Wireless USB Adapter User Guide Windows Wireless Utility Follow the instructions in the appropriate section below to use your computer system’s built-in wireless utility: Windows 8.1/8/7, Windows XP. Windows 8.1/8/7 1. Click or (Network icon) on the system tray. Select the network you want to join, and click Connect. Enter your Wi-Fi password when prompted.
TL-WN822N Chapter 5 300Mbps High Gain Wireless USB Adapter User Guide Management TP-LINK Utility provides you with an easy way to manage your adapter. It includes the following sections: Status - View the information of the current Wi-Fi network connection and of the adapter. Profile - Save or manage various Wi-Fi network connection settings. Advanced - Turn on or off the SoftAP mode and power saving mode, switch between TP-LINK Utility and Windows Wireless Utility (for Windows XP only).
TL-WN822N 300Mbps High Gain Wireless USB Adapter User Guide To add a new profile 1. Click the Add button, and then a new window will open. 2. Complete the settings as shown in the following figure, and click Save. Profile Name - Enter a name for your profile, such as Home, Office, Coffeehouse. Do not enter the profile name that already exists. SSID - Select your Wi-Fi network from the drop-down list or enter your Wi-Fi network name manually.
TL-WN822N 300Mbps High Gain Wireless USB Adapter User Guide Note: As for Key Index, you can select ASCII or Hexadecimal format from the drop-down list. ASCII_64 - Please enter 5 ASCII characters. ASCII_128 - Please enter 13 ASCII characters. Hexadecimal_64 - Please enter 10 Hexadecimal digits (any combination of 0-9, a-f, A-F, excluded space). Hexadecimal_128 - Please enter 26 Hexadecimal digits (any combination of 0-9, a-f, A-F, excluded space).
TL-WN822N 5.3 300Mbps High Gain Wireless USB Adapter User Guide Advanced Select wireless configuration tool - In Windows XP. You can either use TP-LINK Utility or Windows wireless configuration tool. While in other operating systems, since you can use both TP-LINK Utility and Windows wireless configuration tool at the same time, this function is disabled. Wireless network adapter switch - If you’ve installed several adapters in your computer, you can switch to another adapter among the drop-down list.
TL-WN822N 300Mbps High Gain Wireless USB Adapter User Guide Soft AP mode: Select ON or OFF to enable or disable this function. Internet Connecting Share(ICS): Select a network connection that can access to the Internet from the drop-down list. For example, if your computer is connecting to the Internet via an Ethernet cable, you should select the corresponding Local Area Connection so as to share the network with other wireless devices.
TL-WN822N Chapter 6 300Mbps High Gain Wireless USB Adapter User Guide Uninstall Driver and Utility The software uninstallation steps vary a bit in different systems, please follow the appropriate instructions for your Windows operating system: Windows 8/8.1, Windows XP/7. • Windows 8/8.1 Uninstall driver: Go to Start > Apps, and find the TP-LINK application. Click Uninstall - TP-LINK TL-WN822N Driver, then follow the on-screen instructions to complete the uninstallation.
TL-WN822N 300Mbps High Gain Wireless USB Adapter User Guide Appendix A: Specifications Normal Interface Mini USB Interface Standards IEEE 802.11n, IEEE 802.11g, IEEE 802.11b; IEEE802.1x, IEEE802.11a Operating System Windows XP, Windows 7, Windows 8, Windows 8.1 Throughput 300Mbps (Maximal) Data Security WEP, WPA / WPA2, WPA-PSK / WPA2-PSK Frequency* 2.4 ~ 2.
TL-WN822N 300Mbps High Gain Wireless USB Adapter User Guide Appendix B: Glossary 802.11n - 802.11n builds upon previous 802.11 standards by adding MIMO (multiple-input multiple-output). MIMO uses multiple transmitter and receiver antennas to allow for increased data throughput via spatial multiplexing and increased range by exploiting the spatial diversity, perhaps through coding schemes like Alamouti coding. The Enhanced Wireless Consortium (EWC) was formed to help accelerate the IEEE 802.
TL-WN822N 300Mbps High Gain Wireless USB Adapter User Guide determines the key length. 128-bit encryption requires a longer key than 64-bit encryption. Keys are defined by entering in a string in HEX (hexadecimal - using characters 0-9, A-F) or ASCII (American Standard Code for Information Interchange – alphanumeric characters) format. ASCII format is provided so you can enter a string that is easier to remember. The ASCII string is converted to HEX for use over the network.
