TL-WN910N Wireless N CardBus Adapter 2.4GHz Draft 11n/g/b Rev: 1.0.
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. ® is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2008 TP-LINK TECHNOLOGIES CO., LTD.
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not in-stalled and used in accordance with the instructions, may cause harmful interference to radio communications.
National Restrictions 2400.0-2483.5 MHz Country Restriction Reason/remark General authorization required for outdoor Bulgaria use and public service Outdoor use limited to Military Radiolocation use. Refarming of the 2.4 10 mW e.i.r.p. within GHz band has been ongoing in recent years to the band 2454-2483.5 allow MHz implementation planned 2012 France If used current outside relaxed of own regulation.
CONTENTS Package Contents .................................................................................................... 1 Chapter 1 Introduction ........................................................................................ 2 1.1 Overview of the Product ...................................................................................... 2 1.2 Features .............................................................................................................. 2 1.3 LED Status ......
Package Contents The following items should be found in your package: ¾ ¾ ¾ One TL-WN910N Wireless N CardBus Adapter Quick Installation Guide One resource CD for TL-WN910N, including: • • • TP-LINK Wireless N Client Utility (11NWCU) and Drivers User Guide Other Helpful Information ) Note: Make sure that the package contains the above items. If any of the listed items are damaged or missing, please contact with your distributor.
TL-WN910N Wireless N CardBus Adapter Chapter 1 Introduction Thank you for choosing the TL-WN910N Wireless N CardBus Adapter! 1.1 Overview of the Product The adapter is a draft 802.11n client device; it is designed to provide a high-speed and unrivaled wireless performance for your notebook. With a faster wireless connection, you can get a better Internet experience, such as downloading, gaming, video streaming and so on. With the 802.
TL-WN910N 1.3 Wireless N CardBus Adapter LED Status LED Indications Status Blue Activity Blue Status Working Status Flashing Alternately The adapter is trying to scan a networking Flashing connection. Alternately Status Blue Intermittently The adapter is already connected but is not Activity Blue Intermittently transmitting or receiving data. Status Blue Flashing Activity Blue Flashing The adapter is transmitting or receiving data.
TL-WN910N Wireless N CardBus Adapter Chapter 2 Installation Guide 2.1 Hardware Installation To install the adapter, follow these steps listed as below: 1. Locate an available CardBus slot on your laptop. 2. With the connector pin end facing the CardBus slot and the label facing up, slide the Adapter into the CardBus slot until it locks in place. ) Note: Once the Adapter is firmly in place, the Found New Hardware Wizard screen will pop up. 2.2 Software Installation 2.2.
TL-WN910N Wireless N CardBus Adapter Figure 2-1 2. Soon, Figure 2-2 will display after a moment. Click Next to continue. Figure 2-2 3. After that, you should choose a Setup type. It is recommended that you select Install Client Utilities and Driver. Select Install Driver Only to install driver only, select Make Driver Installation Diskette(s) to make the diskette(s) as the installation driver (shown in Figure 2-3). Click Next to continue.
TL-WN910N Wireless N CardBus Adapter Figure 2-3 4. Click Browse to change the destination location for the software, then click Next in the screen below (shown in Figure 2-4). Figure 2-4 5. After that, select the program folder, you should create a new folder name or select one from the Existing Folders list. It is recommended that you keep the default setting. Click Next to continue the installation.
TL-WN910N Wireless N CardBus Adapter Figure 2-5 6. Choose configuration tool, if you are not sure, please leave it default. Then click Next to continue. Figure 2-6 7. Click OK to continue the Installation on the screen below.
TL-WN910N Wireless N CardBus Adapter Figure 2-7 8. Wait a while for the setup as shown in Figure 2-8. Figure 2-8 ) Note: 1) For Windows XP, the Setup Wizard will notify you of how to proceed with the installation during these steps (shown in Figure 2-9). Our drivers have been tested thoroughly, and are able to work with the operating system. Click Continue Anyway to continue the Installation.
TL-WN910N 2) Wireless N CardBus Adapter Figure 2-9 In Windows 2000, the warning screen is shown below (Figure 2-10), and please select Yes to continue installation. Figure 2-10 9. After all the steps above, you will see the screen below, click Finish to complete the installation.
TL-WN910N Figure 2-11 10 Wireless N CardBus Adapter
TL-WN910N Wireless N CardBus Adapter Chapter 3 Configuration TP-LINK TL-WN910N can be configured by TP-LINK Wireless N Client Utility (11NWCU). This chapter describes how to configure your Adapter for wireless connectivity on your Wireless Local Area Network (WLAN) and use the data security encryption features. After Installing the Adapter, the Adapter’s tray icon will appear in your system tray.
TL-WN910N Wireless N CardBus Adapter Figure 3-1 The following table describes the items found on the Current Status screen. ¾ Profile Name - This shows the name of current selected configuration profile. The configuration of Profile name will be described on the General tab of Profile Management. ¾ Link Status - This shows whether the station is associated to the wireless network. ¾ Wireless Mode - Here displays the wireless mode.
TL-WN910N 3.2 Wireless N CardBus Adapter Profile Management Click the Profile Management tab of the 11NWCU and the next screen will appear (shown in Figure 3-2). The Profile Management screen provides tools to: ¾ Add a new profile ¾ Modify a profile ¾ Remove a profile ¾ Activate a Profile ¾ Import a Profile ¾ Export a Profile ¾ Scan Available Networks ¾ Order profiles Figure 3-2 3.2.
TL-WN910N Wireless N CardBus Adapter Figure 3-3 2. Edit the Security tab Select the Security tab in the screen above, and then you can edit the fields to configure the profile. To define the security mode, select the radio button of the desired security mode as follows.
TL-WN910N Wireless N CardBus Adapter Figure 3-4 ¾ WPA/WPA2: Wi-Fi Protected Access. ¾ WPA/WPA2 Passphrase: Wi-Fi Protected Access Passphrase. ¾ 802.1x: Enables 802.1x security. ¾ Pre-Shared Key (Static WEP): Enables the use of shared keys that are defined on both the access point and the station. To define shared encryption keys, choose the Shared Key radio button and click Configure to fill in the Define Shared Keys window (shown in Figure 3-5).
TL-WN910N Wireless N CardBus Adapter Figure 3-5 ) Note: Select different Security Options, the configurations are different; you can select the appropriate security option and configure the exact key as your need. 3. Edit the Advanced tab This screen below allows you to make advanced configuration for the profile.
TL-WN910N Wireless N CardBus Adapter Figure 3-6 ¾ ¾ Power Save Mode - Please select the power save mode in the drop-down list. • Maximum - Selects maximum mode to let the access point buffer incoming messages for the Adapter. The Adapter will detect the access point if any messages are waiting periodically. • Normal - Normal mode uses maximum when retrieving a large number of packets, then switches back to power save mode after retrieving the packets.
TL-WN910N ¾ Wireless N CardBus Adapter Wireless Mode when Starting an Ad Hoc Network: Specifies 2.4 GHz 300/54/11 Mbps to start an Ad Hoc network if no matching network name is found after scanning all available modes. This mode also allows the selection of the channel that the Wireless Adapter uses. The channels available depend on the regulatory domain. If the adapter finds no other ad hoc adapters, the channel that the adapter starts the ad hoc network with will be selected automatically.
TL-WN910N 2. Select the profile name required in the Profiles List. 3. Click Activate. 3.2.4 Wireless N CardBus Adapter Export a Profile 1. From the Profile Management screen (shown in Figure 3-2), highlight the profile to export. 2. 3. Click Export…, the Export Profile window will then appear below. Browse the directory to export the profile to. 4. Click Save. The profile should then be exported to the specified location. Figure 3-8 3.2.5 1. Import a Profile 2. 3.
TL-WN910N 3.2.6 Wireless N CardBus Adapter Scan Available Networks 1. Click Scan on the Profile Management screen (shown in Figure 3-2), the Available Infrastructure and Ad Hoc Networks window will appear below. 2. 3. Click Refresh to refresh the list at any time. Highlight a network name and click Activate to connect to an available network. If no configuration profile exists for that network, the Profile Management window will open the General tab screen.
TL-WN910N Wireless N CardBus Adapter Figure 3-11 3. 4. Highlight the profiles to add to auto profile selection, and click Add. The profile will appear in the Auto Selected Profiles box. Highlight a profile in the Auto Selected Profiles box. 5. Click Move Up or Move Down as appropriate. ) Note: The first profile in the Auto Selected Profiles box has highest priority, while the last profile has the lowest priority. 6. 7. Click OK.
TL-WN910N ¾ Unicast frames transmitted and received ¾ Total bytes transmitted and received Wireless N CardBus Adapter Figure 3-12 3.3.1 Check Driver Information Click the Adapter Information button in the screen above, you will see the adapter information, including general information about the wireless network adapter and the Network Driver Interface Specification (NDIS) driver. Access the adapter information from the Diagnostics tab. ¾ Card Name - The name of the wireless network adapter.
TL-WN910N Wireless N CardBus Adapter Figure 3-13 3.4 Configuration for Windows Vista After the Adapter's driver has been installed, Windows Vista will display a wireless Network Connection message like this one. Figure 3-14 means the connection has been established. Icon Icon means there is no connection. To establish a connection, please follow the steps below. 1. Right-click the icon in your system tray, then click Connect to a network.
TL-WN910N Wireless N CardBus Adapter Figure 3-15 2. The following screen will show you available wireless networks. Highlight the one you want to join, and then click Connect. Figure 3-16 3. To continue, click Connect Anyway. Click the Cancel button to end the connection.
TL-WN910N 4. Wireless N CardBus Adapter If the connection is successful established, the following screen will appear, click close to finish the connection.
TL-WN910N Wireless N CardBus Adapter Appendix A: Specifications Normal Interface 32 bit CardBus Interface Standards IEEE802.11n (draft); IEEE802.11g; IEEE802.11b; Operating System Windows 2000, XP, Vista Throughput 300Mbps (Maximal) 27/54/81/108/162/216/243/270Mbps 13.5/27/40.5/54/81/108/121.5/135Mbps Radio Data Rate 13/26/39/52/78/104/117/130Mbps 6.5/13/19.5/26/39/52/58.5/65Mbps 1/2/5.
TL-WN910N Wireless N CardBus Adapter Appendix B: Glossary ¾ 802.11b - The 802.11b standard specifies a wireless product networking at 11 Mbps using direct-sequence spread-spectrum (DSSS) technology and operating in the unlicensed radio spectrum at 2.4GHz, and WEP encryption for security. 802.11b networks are also referred to as Wi-Fi networks. ¾ 802.
TL-WN910N Wireless N CardBus Adapter developed by the military for use in reliable, secure, mission-critical communications systems. It is designed to trade off bandwidth efficiency for reliability, integrity, and security. In other words, more bandwidth is consumed than in the case of narrowband transmission, but the trade off produces a signal that is, in effect, louder and thus easier to detect, provided that the receiver knows the parameters of the spread-spectrum signal being broadcast.
