User's Manual
Table Of Contents
- Chapter 1. Introduction
- Chapter 2. Installation
- Chapter 3. Print Server Installation
- Chapter 4. Software Installation
- Chapter 5. Configuration from Embedded Web Server
- Chapter 6. TCP/IP LPR Port Printing Installation
- Chapter 7. Upgrading Print Server
- Chapter 8. Troubleshooting
- Appendix A: Reset Button
- Appendix B: Frequently Asked Questions
- Appendix C: Additional Installation Instructions
21
All print server(s) on the WLAN will be displayed along with their respective device name, MAC Address, print
server name, firmware version, and status. The terms are defined as follows:
¾ Device Name: The name of the print server hardware used for identification purposes.
¾ MAC Address: The Ethernet address of the print server.
¾ Version: The firmware version of the print server.
¾ Status: Connected printer’s status presently.
4.6 Wizard
Wizard is a configuration program that can assist you in setting up the necessary parameters for your print
server device to function. Setup a print server by using Wizard.
TCP/IP Wizard
1) Click Wizard button just like a picture ＜
＞.and select TCP/IP Wizard.