User's Manual
Table Of Contents
- Chapter 1. Introduction
- Chapter 2. Installation
- Chapter 3. Print Server Installation
- Chapter 4. Software Installation
- Chapter 5. Configuration from Embedded Web Server
- Chapter 6. TCP/IP LPR Port Printing Installation
- Chapter 7. Upgrading Print Server
- Chapter 8. Troubleshooting
- Appendix A: Reset Button
- Appendix B: Frequently Asked Questions
- Appendix C: Additional Installation Instructions
24
4.7.3 TCP/IP:
User can change the prin
t server’s IP address. Default is 192.168.0.10/255.255.255.0.
We highly recommend specifying a fixed IP address for the print server
4.8 Upgrade
Upgrade allows the user to upgrade the print server device. In order to upgrade the unit please perform the
steps as follows:
1) Click Upgrade button just like a picture ＜
＞, as shown as follow picture
2) Select General Upgrade. Make sure that the upgrade file(mps43.bin) is located in the same directory as
PSAdmin.