User's Manual
Table Of Contents
- Chapter 1. Introduction
- Chapter 2. Installation
- Chapter 3. Print Server Installation
- Chapter 4. Software Installation
- Chapter 5. Configuration from Embedded Web Server
- Chapter 6. TCP/IP LPR Port Printing Installation
- Chapter 7. Upgrading Print Server
- Chapter 8. Troubleshooting
- Appendix A: Reset Button
- Appendix B: Frequently Asked Questions
- Appendix C: Additional Installation Instructions
25
¾ Print Server Name: This option allows you to view device name of the print server. To correct the print
server’s device name.
¾ System Up Time: This option allows you to view uptime of the print server. When you start the print
server, it will compute the print server from start time to power off time.
¾ Firmware Version: This option allows you to view firmware version of the print server. To verify the
print server’s firmware version is newer in this time.
¾ MAC Address: This option allows you to view Node ID of the print server. The Node ID is unique from
any print server.
5.3.2 Wireless Status
1) C
lick Status, it then appears the sub-menu.
2) Click Wireless, it then as shown in the following picture about the current wireless settings.