User's Manual
Table Of Contents
- Chapter 1. Introduction
- Chapter 2. Installation
- Chapter 3. Print Server Installation
- Chapter 4. Software Installation
- Chapter 5. Configuration from Embedded Web Server
- Chapter 6. TCP/IP LPR Port Printing Installation
- Chapter 7. Upgrading Print Server
- Chapter 8. Troubleshooting
- Appendix A: Reset Button
- Appendix B: Frequently Asked Questions
- Appendix C: Additional Installation Instructions
28
Enter the IP address of the print server as the URL, default: 192.168.0.10. Then the print server’s home page
will appear in content of the web browser.
Please follow this information in the setup menu of the print server:
5.4.1 System Setup
1) C
lick Setup, it then appears the sub-menu.
2) Click System, it then as shown in the following picture.
¾ Print Server Name: This option allows you to input device name of the print server. To correct the
print server’s device name.
¾ Password: This option allows you to change password of the print server. Factory default is 0000.
(default user name is admin, it’s not available to change)
5.4.2 Wireless Setup:
1) C
lick Setup, it then appears the sub-menu.
2) Click Wireless, it then as shown in the following picture.