User's Manual

29
Basic Settings:
¾ Network Type: To change the WLAN type to Ad-Hoc(default) or Infrastructure.
¾ SSID: To change the SSID to connect an existing wireless network.(default: WLAN-PS)
¾ Channel: Indicates the channel setting for this print server.
¾ Transmission Rate: Select the basic transfer rates based on the speed of wireless network.
¾ Wireless Mode: Select the WLAN mode based on the existing wireless network
Advanced Settings:
¾ Security Type: To change the wireless security settings based on the existing wireless network. Default
setting is Disable.
The print server provides three kind of security settings: WEP (64/128bit), WPA (TKIP/AES (CCMP)) and WPA2
(TKIP/AES (CCMP)) to fit an existing security setting of wireless network.
WPA-PSK and WPA2-PSK support Infrastructure mode only.
And the following site survey table will provide a list of existing wireless network. You can choose one to join.
5.4.3 TCP/IP Setup:
1) C
lick Setup, it then appears the sub-menu.
2) Click TCP/IP, it then as shown in the following picture.