User's Manual

30
¾ DHCP/BOOTP: This option allows you to select DHCP/ BOOTP option. If there is a DHCP/BOOTP server
on your network. This option allows the print server to obtain IP-related settings automatically from your
DHCP server.
¾ IP Address: This option allows you to input IP address from the print server. The IP address must meet the
IP addressing requirements of the network segment.
)Note:
On the TCP/IP Setup screen, specify a fixed IP address is highly recommended.
¾ Subnet Mask: This option allows you to input subnet mask from the print server. The IP address must
meet the IP addressing requirements of the network segment.
¾ Default Router: This option allows you to input gateway from the print server. This IP address of gateway
must meet the router or gateway to go across of the network segment.
5.5 Misc
1) Click Misc, it then appears the sub-menu.
2) Click Factory Default, it can restore the factory default settings to print server. It will erase all previous
settings.