User's Manual

41
Appendix A: Reset Button
Perform a Factory Default:
1. Disconnect the external power adapter.
2. Hold down the reset button.
3. Reconnect the external power adapter. Wait about 15 seconds.
4. Release the reset button.
5. The print server will restart, the POST time needs 40 seconds.
WARNING:
This will erase all settings of print server to default and should be performed with caution!
After performing a factory default, the default settings will be:
z Username: admin
z Password: 0000
z Wireless Mode: Ad-Hoc (Peer-to-Peer)
z Channel: 1
z SSID: WLAN-PS
z IP Address: 192.168.0.10
z Subnet Mask: 255.255.255.0