User's Manual
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Hardware Installation
- Chapter 3. How to Configure the Print Server
- Chapter 4. More Configuration for the Print Server
- Appendix A: How to Reset the Print Server
- Appendix B: Frequently Asked Questions
- Appendix C: Printer Installation in Windows OS
- Appendix D: Additional Installation Instructions
TL-WPS510U Pocket-Sized Wireless N Print Server
IP Address: This option allows you to input IP address
from the print server. The IP address
must meet the IP addressing requirements of the network segment.
Note:
On the TCP/IP Setup screen, specify a fixed IP address is highly recommended.
Subnet Mask: This option allows you to input subnet mask from the print server. The IP
address must meet the IP addressing requirements of the network segment.
Default Router: This option allows you to input gateway from the print server. This IP address
of gateway must meet the router or gateway to go across of the network segment.
4.4 Misc
4.4.1 Factory Default
Click OK to restore the print server to its Factory Default settings.
Figure 4-11
48