User Manual

-94-
TL-WR1043ND
450Mbps Wireless N Gigabit Router
5.14 Bandwidth Control
There are two submenus under the Bandwidth Control menu: Control Settings and Rules List.
Click any of them, and you will be able to configure the corresponding function. The detailed
explanations for each submenu are provided below.
 Note:
Bandwidth Control will become invalid if NAT Boost is enabled. If you want to enable Bandwidth
Control, please go to “Advanced→NAT Boost” to disable NAT Boost first.
5.14.1 Control Settings
Choose menu “Advanced → Bandwidth Control → Control Settings”, and then you can
configure the Egress Bandwidth and Ingress Bandwidth in the next screen. For optimal control
of the bandwidth, please select the right Line Type and ask your ISP for the total bandwidth of
the egress and ingress.
Figure 5- 77 Bandwidth Control Settings
 Enable Bandwidth Control - Select this checkbox so that the Bandwidth Control settings
can take effect.

Line Type - Select the right type for you network connection. If you don’t know how to
choose, please ask your ISP for the information.
 Egress Bandwidth - The upload speed through the Internet port.
 Ingress Bandwidth - The download speed through the Internet port.
5.14.2 Rules List
Choose menu “Advanced → Bandwidth Control → Rules List”, and then you can view and
configure the Bandwidth Control rules in the screen below.